Week 4 Soldering Workshop
Week 4 was all about the Arduino and soldering. Your assignment was to finish soldering all the components onto the bare bone Arduino printed circuit board. This is due in class next week. I have uploaded some images of the Arduino I soldered. Check each image and look at the photo-notes. They contain advice and some tricky spots to look out for. The NASA student handbook for hand soldering is in my mailbox in the CDT lab. Grab it and photo copy if you need some help sodering NASA-style. We are having a supplementary workshop on Friday @ 1200 hours in the CDT lab and on Saturday @ 1200 hours at Eyebeam in Chelsea (directions here). Attend these extra sessions if you are having trouble soldering your board or have additional questions about the assignment. In addition to the flickr photos I have uploaded, use the following links as references when you solder:
Arduino assembly instruction by Tom Igoe (these instructions are for a slightly different version of the USB arduino. But they can be very helpful in conjunction with the proper schematic and board view.)
February 13th, 2007
Entry Filed under: Assignments, Spring 2007
Leave a Comment
You must be logged in to post a comment.
Trackback this post | Subscribe to the comments via RSS Feed